EISEN 26120G Precision Engine Lathe, 4.5" Bore, 26" x 118", 15HP, Made in Taiwan
Eisen Machinery
$ 24,499.00 $ 27,550.00
is on back order
EISEN 26120G Precision Engine Lathe, 4.5" Bore, 26" x 118", 15HP, Made in Taiwan
FREE SHIPPING PROMOTION GOING ON NOW
EISEN 26120G Precision Engine Lathe with 4” Spindle Hole
Great for turning of long workpieces up to 118" between centers
Features
Spindle
- Large spindle through hole allows larger diameter parts than the competition.
- Precision NSK and SKF bearings installed on spindle to ensure accuracy and rigidity for heavy cutting.
- Maximum cutting depth can be 8mm and roundness reaching 3 micron (200mm long).
Durability
- Heat treated and precision ground alloy gears.
- Wear-resistant phosphor bronze lead screw nuts.
Safety gears
- Equipped with plastic rear gears, so that shafts and gears inside headstock are well protected if crash should occur (optional).
Cone clutch
- Cone clutch overload device in apron to ensure safety when operating.
Extra large tailstock clamp
- The tailstock has extra large clamp for increased contact and stability.
Two-speed tailstock
- Choose between fast movement or fine control with the optional two-speed tailstock.
Lubrication
- Bedways of cross slide and bed are automatically lubricated with a lubrication pump that lubricates as the carriage moves.
- Oil bath lubrication for cross feedscrew & nuts provide extra degree of protection and prolong service life.
Meehanite casting
- Heat treated Meehanite casting bed. Hardness of bed reaching HS70 (approx. HRC 53)
- One-piece base combines high rigidity and good vibration dampening characteristic.
Convenience
- Universal gearbox for both inch and metric threading — conversion table is also included.
- High-capacity coolant system offers ample coolant output.
Specifications
| Attribute | Data |
|---|---|
| Swing over Bed | 26.2” (665 mm) |
| Swing over Cross Slide | 17.32” (440 mm) |
| Center Distance | 118" (3000mm) |
| Swing over Gap | 35.04” (890 mm) |
| Bed Width | 15.75” (400 mm) |
| Spindle Nose | D1-11 |
| Spindle Bore | 4.5” (115 mm) |
| Taper of Spindle Bore | MT 7 |
| Spindle Speed | 10~1000 (12-step) |
| Inch Thread Range | 2 ~ 56 TPI |
| Longitudinal Feeds Range | 0.0020 ~ 0.0323 ipr (0.05 ~ 0.82 mm/rev) |
| Cross Feeds Range | 0.0008 ~ 0.011 ipr (0.02 ~ 0.28 mm/rev) |
| Leadscrew Diameter | 1.5” (38 mm) |
| Leadscrew Pitch | 4 TPI |
| Taper of Tailstock Center | MT 5 |
| Tailstock Quill Travel | 6.5” (165 mm) |
| Tailstock Quill Diameter | 3.35” (85 mm) |
| Main Drive Motor | 15 HP |
| Coolant Pump | 1/8 HP |
| Compound Rest Travel | 7.87” (200 mm) |
| Cross Slide Travel | 14.76" (375 mm) |
| Machine Length | 186” (4730 mm) |
| Machine Width | 41” (1030 mm) |
| Machine Height | 52” (1310 mm) |
| Packing Length | 191” (4850mm) |
| Packing Width | 45” (1150 mm) |
| Packing Height | 76” (1940 mm) |
| Net Weight | 8100 lbs |
| Gross Weight | 8500 lbs |
Standard Accessories
- Face plate
- Steady rest
- Follow rest
- Centers
- Coolant system
- 4-way tool post
- 2-speed tailstock
- Safety pin mechanism for headstock gear protection
- Auto lubrication for carriage
- Longitudinal carriage stops
- Work light
- Rear splash guard
- Chuck guard with microswitch
- Tools and tool box
Optional Accessories
- 15" 3-jaw cast iron self-centering chuck $1,507.50
- 20" 4-jaw independent chuck with solid jaws 1,642.50
- Back plate (only if chuck is plain back)
- 4-position carriage stop
- Micro carriage stop
- Live centers
- Rear cutter rest
- Taper turning attachment
- Change gears for D.P. and module threads
- Change gears for 2 TPI and 3 TPI threads
- 5C lever collet closer
- Driving plate
- ALORIS-style quick change tool post
- Digital Readout (DRO)
- Chip guard
- Hydraulic copying attachment
- ID/OD grinder
Flatbed Truck Shipping
This lathe is to be shipped by flat bed truck. Must have forklift to unload. Shipping cost from our warehouse to east coast is around $2200.
For detailed shipping quote please let us know your zip code.
FREE SHIPPING PROMOTION GOING ON NOW
Questions?
If you have any questions, please let us know we’ll be happy to help.
Share this Product
Home
/ Collections /Engine Lathes
/ EISEN 26120G Precision Engine Lathe, 4.5" Bore, 26" x 118", 15HP, Made in Taiwan
