EISEN 2260G Precision Engine Lathe, 3" Bore, 22" x 60", 15HP, Made in Taiwan
EISEN 2260G Precision Engine Lathe with 4” Spindle Hole
Great for turning of long workpieces up to 60" between centers
- Large spindle through hole allows larger diameter parts than the competition.
- Precision NSK and SKF bearings installed on spindle to ensure accuracy and rigidity for heavy cutting.
- Maximum cutting depth can be 8mm and roundness reaching 3 micron (200mm long).
- Heat treated and precision ground alloy gears.
- Wear-resistant phosphor bronze lead screw nuts.
- Equipped with plastic rear gears, so that shafts and gears inside headstock are well protected if crash should occur (optional).
- Cone clutch overload device in apron to ensure safety when operating.
Extra large tailstock clamp
- The tailstock has extra large clamp for increased contact and stability.
- Choose between fast movement or fine control with the optional two-speed tailstock.
- Bedways of cross slide and bed are automatically lubricated with a lubrication pump that lubricates as the carriage moves.
- Oil bath lubrication for cross feedscrew & nuts provide extra degree of protection and prolong service life.
- Heat treated Meehanite casting bed. Hardness of bed reaching HS70 (approx. HRC 53)
- One-piece base combines high rigidity and good vibration dampening characteristic.
- Universal gearbox for both inch and metric threading — conversion table is also included.
- High-capacity coolant system offers ample coolant output.
|Swing over Bed
||22” (560 mm)
|Swing over Cross Slide
||13.39” (340 mm)
|Swing over Gap
||31.02” (788 mm)
||15.75” (400 mm)
||3.34” (85 mm)
|Taper of Spindle Bore
|Inch Thread Range
||2 ~ 56 TPI
|Longitudinal Feeds Range
||0.0020 ~ 0.0323 ipr (0.05 ~ 0.82 mm/rev)
|Cross Feeds Range
||0.0008 ~ 0.011 ipr (0.02 ~ 0.28 mm/rev)
||1.5” (38 mm)
|Taper of Tailstock Center
|Tailstock Quill Travel
||6.5” (165 mm)
|Tailstock Quill Diameter
||3.35” (85 mm)
|Main Drive Motor
|Compound Rest Travel
||7.87” (200 mm)
|Cross Slide Travel
||14.76" (375 mm)
||114” (2900 mm)
||41” (1030 mm)
||50” (1260 mm)
||45” (1150 mm)
||76” (1940 mm)
- Steady rest
- Follow rest
- Coolant system
- 4-way tool post
- 2-speed tailstock
- Safety pin mechanism for headstock gear protection
- Auto lubrication for carriage
- Longitudinal carriage stops
- Work light
- Rear splash guard
- Chuck guard with microswitch
- Tools and tool box
- 3-Jaw scroll chuck
- 4-Jaw independent chuck
- Face plate
- Back plate (only if chuck is plain back)
- 4-position carriage stop
- Micro carriage stop
- Live centers
- Rear cutter rest
- Taper turning attachment
- Change gears for D.P. and module threads
- Change gears for 2 TPI and 3 TPI threads
- 5C lever collet closer
- Driving plate
- ALORIS-style quick change tool post
- Digital Readout (DRO)
- Chip guard
- Hydraulic copying attachment
- ID/OD grinder
If you have any questions, please let us know we’ll be happy to help.