CM-2
CM-2 MONASET TOOL & CUTTER GRINDER
Fans of CM-2 tool & cutter grinder can find the best price for this grinder at Eisen Machinery.
|
          |
CM-2 MONASET Tool & Cutter Grinder Specifications
| CAPACITY | ||
| Worhead | ||
| Workhead Swing over Main Slide, Max dia. | 304mm | 12″ |
| Workhead collet work diameter, max. | 31mm | 1.25″ |
| min. | 3mm | 0.12″ |
| Lead generated by spiral lead mechanism, min | 45mm | 1.81″ |
| Lead between spindle nose and tail center, max | 152mm | 6″ |
| Wheelhead | ||
| Grinding wheel dia. max | 100mm | 4″ |
| RANGE | ||
| Workhead | ||
| Main slide travel | 146mm | 5.75″ |
| Offset slide travel, total | 133mm | 5.25″ |
| -- front of center | 76mm | 3″ |
| -- rear of center | 57mm | 2.25″ |
| Workhead angular adjustment | ||
| Horizontal plane (turable base) | 235° | |
| Vertical plane, above center | 40° | |
| below center | 40° | |
| Wheelhead | ||
| Longitudinal slide travel | 152mm | 6″ |
| Vertical slide travel, total | 241mm | 9.50″ |
| -- above center | 114mm | 4.50″ |
| -- below center | 127mm | 5″ |
| Cross slide travel, total | 190mm | 7.50″ |
| -- front of center | 76mm | 3″ |
| -- rear of center | 114mm | 4.50″ |
| SPINDLE SPEEDS | ||
| Workhead, one speed | 436 rpm | |
| Wheelhead, three speds | 4000, 5729, 8000 rpm | |
| MOTORS | ||
| Workhead drive, AC | 1/4 HP | 0.186 kw |
| Wheelhead drive, AC | 1/2 HP | 0.373 kw |
| DIMENSIONS | ||
| Area of base only | 635mm x 660mm | 25″ x 26″ |
| Area required for machine | 1524mm x 1701mm | 60″ x 67″ |
| Height from floor to center of workhead spindle | 1212mm | 47.72″ |
| Height, overall with wheelhead raised | 1517mm | 62.12″ |
| Net weight | 691 kg | 1525 lbs |
